loco turkey fryer wont stay lit

by

loco turkey fryer wont stay lit

FIXED: Turkey Fryer won’t stay lit / Flame goes out

FAQ

Why won’t my turkey fryer stay lit after releasing the button?

It is probably just the thermocouple is not getting hot. If the flame looks like it is going out when you release slowly just push it back in for longer before it goes out. The thermocouple may not be quite in the pilot flame.

Why is my deep fryer not staying lit?

Problem is the thermal coupler or thermostat. Check the temp when it goes out. If the grease is too hot the thermostat isn’t working. It is causing the automatic shut off to happen. If the greas isn’t too hot the thermo coupler could be faulting. The thermo coupler, I believe, is what the flame of the pilot touches.

Why does my fryer pilot light keep going out?

The thermopile or thermocouple might not be functioning correctly. These components are responsible for sensing the pilot flame and enabling the gas valve. If they are faulty or not properly aligned with the pilot flame, they might not generate enough voltage to keep the gas valve open when the unit demands more heat.

Why does my propane fryer keep shutting off?

You were right the first time, it’s a bad thermostat. The thermostat cycles the burner off when the oil reaches the set temp. With a bad thermostat the oil will keep heating til it reaches around 450F and trips the hi limit thermostat, cutting all the gas.

What to do if a turkey fryer won’t stay lit?

If Browning Turkey Fryer Won’t Stay Lit You can simply solve this issue by moving the thermocouple next to the edge of your burner. Turn your adjustable regulator to the on position. Then, place the sensors close to the burner and your fryer will stay lit.

Why does my turkey fryer not stay lit?

Loose /Faulty Connections First, your Turkey fryer doesn’t stay lit during frying because of faulty connections with the cooking game. You may have a bad gas valve connecting. If it happens, it will not read the proper signal from the thermostat. As a result, the gas valve is stuck to open.

How to light a MasterChef turkey fryer?

Turn your adjustable regulator to the on position. Then, place the sensors close to the burner and your fryer will stay lit. This way it will detect the flame easily and at that point, you can easily light your turkey fryer. If Masterchef Turkey Fryer Won’t Stay Lit The problems vary from model to model. However, here are the easy SOLUTION for you.

What to do if Bass Pro turkey fryer won’t stay lit?

If Bass Pro Turkey Fryer Won’t Stay Lit Inspect if the brass connector that connects the timer /over-temp sensor wires to the gas line is loose. If they lose, tighten them. Press that button on the timer box. Set a button around the timer so it runs all the time. You can use one on your cell phone to remind you that time is up.

How to light a turkey fryer?

You can simply solve this issue by moving the thermocouple next to the edge of your burner. Turn your adjustable regulator to the on position. Then, place the sensors close to the burner and your fryer will stay lit. This way it will detect the flame easily and at that point, you can easily light your turkey fryer.

Why does my turkey fryer turn off automatically?

Improper Position of Thermocouple There should have an installation of a thermocouple on the Turkey fryer to detect the heat. But if no heat is detected there, the fryer will be turned off automatically. It protects the gas from leaking if the fire goes out.

Leave a Comment